banner

Products

3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine

3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine

Overview Package Size 2800.00cm * 600.00cm * 400.00cm Package Gross Weight 12000.000kg A. Usage and Application:1. This
SHARE

Description

Overview
Basic Info.
Model NO. PHJ15/ 18/ 20 and ZHJ8015 ~ 8020 /5010
Certification ISO, CE
Automation Automation
Flexible Production Lean Production
Rhythm Flow Production Line
Production Scope Parts Production Line
After-sales Service 1 Year Gurantee, Life Long Technical Support
Welding Torch Control 3 dimensional precise
Down Pressing Roller Heavy duty high precision guiderail
Flange Width Up to 800 mm
Web height Up to 2000mm
Machine Model Standard and special design
Function Units Welding power supply, flux recovery, wire feeder
Minimum flange thickness 3mm
Workpiece cross section Symmetric and Asymmetric
Finished Product welding T Beam and H Beam
Advantage Best Quality, Cost Effectiveness
Flange Thickness Up to 40mm
Welding Position Vertical
Function Assembly Welding Straightening Integral
Working Style Three in One Automatic
Welding Submerged Arc Welding and CO2 Welding
Transport Package Disassembled Into Wooden Case
Specification NW/GW=11660/11765 kg, 32.16CBM
Trademark Wuxi JACK and AMASS
Origin Wuxi, China
Packaging & Delivery
Package Size 2800.00cm * 600.00cm * 400.00cm Package Gross Weight 12000.000kg
Product Description

A. Usage and Application:1. This machine is for producing welding H Beam T Beam with single equipment;2. Max. size of H Beam T Beam: Web height 1500mm/ 1800mm/ 2000 mm, flange thickness 40mm;(Fig.1,2,3) See as below:3. Related product: H Beam Production Line
B. Advantages of Wuxi JACK (Wuxi AMASS) 3 in 1 H Beam Fabrication Machine:
This is superior product of Wuxi JACK (Wuxi AMASS). Below slides gives clear introduction on our superiorities:

3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine


3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine


3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine


3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine


3 in 1 H Beam Assembly Welding Straightening Integral Function Fabrication Machine










C. Category and Model:1. Wuxi JACK (Wuxi AMASS) manufactures 2 series: PHJ and ZHJ:1) PHJ models produce both symmetric and asymmetric cross section H Beam; (Fig.4)2) ZHJ models produce symmetric cross section H Beam;2. Standard models: PHJ15/PHJ18/PHJ20; ZHJ8015/ ZHJ8018/ ZHJ8020;3. Special model is available, such as ZHJ5010 for building small H Beam T Beam.
D. Main Units:
One set of the machine has 5 main units:1. Function units: Assembling, Welding, Straightening; 2. Mechanical frame;3. Input and output conveyors;4. Hydraulic system;5. Electric control system;
E. Wuxi JACK (Wuxi AMASS) Position in the Realm of Delivering 3 in 1 H Beam Assembly Welding Straightening Integral Machine for Customers: 1. In 2009, Wuxi JACK is the 1st company in industry to successfully develop H Beam Fabrication Machine from concept design to mature application, and put it into market. Ever since, it gained more and more customer recognition both in China and Overseas market;2. Over past decades, technical performance and market share of our product always rank top in industry, both in China and Overseas market.
F. Technical Parameters:
ModelPHJ15PHJ18PHJ20ZHJ8015ZHJ8018ZHJ8020
Technical ParameterAutomatic H Beam Production machine (Fit Up Full I Beam Fabrication machine)
Web height200∼1500/ 1800/ 2000 mm
Web Thickness6∼32 mm5∼30mm
Flange width200∼800mm150∼750mm
Flange thickness6∼40 mm
Workpiece length3 ∼15 m (This is just standard length. It can be tailor made)
Welding Seam One time pass of 8~12 mm toe size
Working Speed200∼1200mm/min.(Continuous and Stepless)Consistent with Assembly, Welding, Straightening; A.C. Inverter control, variable frequency drive
Welding ModeSingle Arc or Twin Arc SAW at fillet flat position; CO2 MIG/MAG; Tandem double arc SAW
Workpiece PHJ: Symmetric and Asymmetric; ZHJ: Symmetric only:Cross Section of Welding H Beam/ I Beam/ T Beam
DriveMain driving motor 5.5kW for Assembly and Straightening; Input and Output Conveyor motor: 1.1kW x 2
Hydraulic System4.4kW oil pump motor, working pressure 6~8MPa; Max. pressure 10MPa
Input and Output Conveyor10~11m length in 3 segments each; One with motor, the other two follower-type; Standard length of input conveyor has three segments of machine hands; Output conveyor has one segment of elevation
Machine size(L×W×H)28m×4m×4.6m28m×4m×4.9m28m×4m×5.1m28m×4m×4.2m28m×4m×4.5m28m×4m×4.8m







Technical Parameters
Our AdvantagesAfter Sales ServiceFAQ1. Q: What is the relationship between Wuxi AMASS and Wuxi JACK?
A: Wuxi AMASS and Wuxi JACK are the same company: Wuxi AMASS is wholly owned subsidiary of Wuxi JACK, for overseas trading Wuxi JACK products;
2. Q: What is the nature of your company?
A: Business scope of Wuxi JACK and AMASS covers design, production and selling;
3. Q: What is the range of your company product?
A: Wuxi JACK and AMASS is a professional supplier in Welding and Cutting Industry;Main products of our company include:1) Steel structure production equipment (H Beam/ BOX Beam/ T Beam);2) Edge Milling Machine;3) Structure member Beam end face milling machine;4) CNC Plate Cutting Machine;5) CNC Pipe Cutting Machine;6) Various kinds of conventional and special design welding equipment and machine;7) Various kinds of conventional and special design Straightening machine, etc.;
4. Q: What is the strength of your company?
A:1) Wuxi JACK was founded by 3 senior engineers 15 years ago;2) Engineering team of our company has over 20 years experience on Welding and Cutting industry;3) Operation manager has 14 years experience working in an American Fortune Global 500 Dow Jones Industrial Index Company as senior Project Manager;4) The competitive edge of our company is special design products based on customer demand.
5. Q: What are service terms of your company?
A:1) During business negation: a) Make technical proposal and quotation;b) Answering customer questions;c) Make final contract and technical agreement;2) During order to delivery value chain:a) Design, validate, and manufacture products for customers;b) Inform progress of manufacture to customers;c) Arrangement for package and shipment of products to customers;3) After sale service: a) Technical support on installation and commissioning at customer site;b) 1 year guarantee from the date of acceptance;c) Feedback any technical issues within 4 hours upon getting the notice;
6. Q: Where is location of your company?
A: Wuxi city, Jiangsu province, 130km from Shanghai

Our Contact